Monoblock valve 2 levers predisposed for CARRY OVER
Couplings3/4" GasCircuitDE - SE
Data
ModelDN85
Flow rate90 l/min
Maximum operating pressure300 Bar
Couplings3/4" Gas
Circuit lever 1Double effect
Circuit lever 2Simple effect
Positions lever 10 - Fixed 1 - Spring retutn 2 - Spring return
Positions lever 20 - Fixed 1 - Spring retutn 2 - Spring return
Circuit diagram -
Lever position layout
Carry overTR081575
net weight10.576 kg
Correlated Articles
Family description: 2-LEVER VALVES…PROPERTIES:
Monobloc valves in special cast iron made, studied in smaller dimensions, to give best performances at heigh working pressure.
4 models available.
Item MD - From 1 up to 4 levers valve 40 lt. 3/8”.
Item ML - From 1 up to 6 levers valve 40 lt. 3/8” ready to be connected with a carry over.
Item DN - From 1 up to 6 levers valve 60 lt. 1/2” ready to be connected with a carry over.
Item DN 85 - From 1 up to 3 levers valve 90 lt. 3/4” ready to be connected with a carry over.
Monobloc valves in special cast iron made, studied in smaller dimensions, to give best performances at heigh working pressure.
4 models available.
Item MD - From 1 up to 4 levers valve 40 lt. 3/8”.
Item ML - From 1 up to 6 levers valve 40 lt. 3/8” ready to be connected with a carry over.
Item DN - From 1 up to 6 levers valve 60 lt. 1/2” ready to be connected with a carry over.
Item DN 85 - From 1 up to 3 levers valve 90 lt. 3/4” ready to be connected with a carry over.
Description: Distributors type DN 85 have a standard arrangement for connection in Carryover. This connection is …
Distributors type DN 85 have a standard arrangement for connection in Carryover. This connection is made by closing the septum visible from the hole indicated in the figure with a 3/8" Gas dowel.
The threaded hole itself is then used for the connection with the downstream distributor.
If the threaded hole in question is also plugged, the open center distributor is transformed into a closed center distributor.
The threaded hole itself is then used for the connection with the downstream distributor.
If the threaded hole in question is also plugged, the open center distributor is transformed into a closed center distributor.
Accessory
Spare Part | Date | Shop |
---|---|---|
ModelDN 85 Thread3/8" Gas net weight0.012 kg | € 1.86 | |
modelDN 85 layout net weight0.115 kg | € 38.17 | |
modelDN 85 layout net weight0.202 kg | € 47.60 | |
modelDN 85 layout net weight0.281 kg | € 47.14 | |
modelDN 85 layout net weight0.17 kg | € 47.60 | |
net weight0.353 kg | € 48.47 |
Spare parts
Spare Part | Date | Shop |
---|---|---|
modelTUTTI net weight0.179 kg | € 53.23 | |
modelTUTTI height30 mm Top diameter15 - 18 mm Lower diameter27 - 33 mm net weight0.006 kg | € 4.48 | |
modelTUTTI net weight0.11 kg | € 3.50 | |
lever couplingM 10 center distance of holes37 mm applicable to distributorsDN - DN 85 net weight0.187 kg | € 21.10 | |
modelDN 85 net weight0.277 kg | € 52.83 | |
modelDN 85 net weight0.287 kg | € 51.96 | |
net weight0.042 kg | € 4.68 |