Monoblock valve 2 levers predisposed for CARRY OVER
Couplings1/2" GasCircuitSE - DE
Data
ModelDN
Flow rate60 l/min
Maximum operating pressure250 Bar
Couplings1/2" Gas
Circuit lever 1Simple effect
Circuit lever 2Double effect
Positions lever 10 - Fixed 1 - Spring retutn 2 - Spring return
Positions lever 20 - Fixed 1 - Spring retutn 2 - Spring return
Circuit diagram -
Lever position layout
Carry overTR081821
connection layout of carry-over and closed center j. deere
net weight5.89 kg
Correlated Articles
Accessory for
Family description: 2-LEVER VALVES…PROPERTIES:
Monobloc valves in special cast iron made, studied in smaller dimensions, to give best performances at heigh working pressure.
4 models available.
Item MD - From 1 up to 4 levers valve 40 lt. 3/8”.
Item ML - From 1 up to 6 levers valve 40 lt. 3/8” ready to be connected with a carry over.
Item DN - From 1 up to 6 levers valve 60 lt. 1/2” ready to be connected with a carry over.
Item DN 85 - From 1 up to 3 levers valve 90 lt. 3/4” ready to be connected with a carry over.
Monobloc valves in special cast iron made, studied in smaller dimensions, to give best performances at heigh working pressure.
4 models available.
Item MD - From 1 up to 4 levers valve 40 lt. 3/8”.
Item ML - From 1 up to 6 levers valve 40 lt. 3/8” ready to be connected with a carry over.
Item DN - From 1 up to 6 levers valve 60 lt. 1/2” ready to be connected with a carry over.
Item DN 85 - From 1 up to 3 levers valve 90 lt. 3/4” ready to be connected with a carry over.
Description: DN type distributors have a standard arrangement for the Carryover connection. The connection is …
DN type distributors have a standard arrangement for the Carryover connection.
The connection is made by screwing the bush (indicated in the figure to the side, with code DACO) in the machined seat. From the compass, a pipe is connected to the downstream distributor.
If the bush screwed onto the distributor is plugged, the open center distributor is transformed into a closed center distributor.
The connection is made by screwing the bush (indicated in the figure to the side, with code DACO) in the machined seat. From the compass, a pipe is connected to the downstream distributor.
If the bush screwed onto the distributor is plugged, the open center distributor is transformed into a closed center distributor.
Accessory
Spare Part | Date | Shop |
---|---|---|
modelDN layout net weight0.123 kg | € 41.42 | |
modelMD - MDT - ML - DN layout net weight0.16 kg | € 38.54 | |
modelMD - MDT - ML - DN layout net weight0.177 kg | € 38.54 | |
modelMD - ML - DN layout net weight0.106 kg | € 33.60 | |
ModelDN (new) Thread1/2" Gas net weight0.1 kg | € 35.33 | |
net weight0.353 kg | € 48.47 | |
net weight0.55 kg | € 176.80 |
Spare parts
Spare Part | Date | Shop |
---|---|---|
modelTUTTI net weight0.179 kg | € 53.23 | |
modelTUTTI height30 mm Top diameter15 - 18 mm Lower diameter27 - 33 mm net weight0.006 kg | € 4.48 | |
modelTUTTI net weight0.11 kg | € 3.50 | |
lever couplingM 10 center distance of holes37 mm applicable to distributorsDN - DN 85 net weight0.187 kg | € 21.10 | |
modelDN net weight0.25 kg | € 32.90 | |
modelDN net weight0.24 kg | € 32.90 | |
net weight0.042 kg | € 4.68 |